Rear Coil-Over Kit

For those of you that have struggled with a good set-up for the rear of your car for both ride height and spring rate.... here's the answer!!

This kit shown uses a Bilstein linear valved racing shock that is valved similarly to the common 0929 Bilstein street shock. It has steel "rod-end" style eyelets on both ends. Other shock rates can be used if you have other needs.

The springs are also linear and are available in many rates from 140# to 300#. Most will want a spring rate in the 175#-200# range.  Your car weight and use will dictate your rate needs.

The upper bracket is a bolt in piece and uses the existing upper shock mounts holes.  The lower bolts in also in the lower shock mount, but should be welded in place for strength.

The main benefits:
Numerous spring rates to chose from.
Adjustable ride heights.
One side can be pre-loaded for drag cars.
 

Complete kit with your choice of spring rate:

$495.00

You can also request of second set of springs for an additional $100.